21 Answered Questions for the topic Titration
alculate the molarity of a solution of Nitric Acid (HNO3) if it is 71% pure HNO3 and has a specific gravity of 1.43? (Atomic weight of H=1, N=14, O=16).
answer fast lol , I have an exam rnI hope I don't fail thanksssss
How many milliliters of 0.700 M HNO3 are required to reach the stoichiometric point of the reaction?
Consider the titration of 300.0 mL of 0.700 M NH3 (Kb = 1.8 ´ 10–5) with 0.700 M HNO3. How many milliliters of 0.700 M HNO3 are required to reach the stoichiometric point of the reaction?
How to find Mg of a substance using molarity
Calcium levels in blood can be determined by adding oxalate ion to precipitate calcium oxalate, CaC2O4, followed by dissolving the precipitate in aqueous acid and titrating the resulting oxalic... more
How many mL of a 0.5 M HCL would be needed to neutralize 725 mL of a 1.0 M NaOH?
how do i deduce the moles of the acid reacted with sodium carbonate
The balanced equation is: Na2CO3 + 2HCl ----> 2NaCl + H2O + CO2Moles of sodium carbonate: 0.03945average volume of acid added: 26.3 cm3Acid = HClThis is standardisation of an acid (titration 1)
If 38.17 mL of 0.1072 M NaOH is required to titrate a 15.00 mL sample of sulfuric acid, what is the molarity of the acid? Equation: H2SO4 + 2 OH^1- = 2 H2O + SO4^2- Show all work.
Titration Organic Chemistry
When titration and you are required to use 0.1 Sodium Hydroxide in a titration, but you only have 1.0 N how Dow you calculate the end results of the total acid
When titration total acid and you are required to use 0.1 Normal Sodium Hydroxide, but you only have 1.0 Normal Sodium Hydroxide; how do you calculate the results to reflect a reading For 0.1... more
what vol of 0.100M NaOH solu nece to neutralize the excess HCl if 50.00ml of 0.121 M HCl are added to a 0.200g if Calcium carbonate
Titration Chemistry Lab
This is the full question Samples of hydrochloric acid, of unknown concentration, were titrated with a solution of sodium carbonate. The flasks were rinsed with sodium carbonated stock... more
What is parallax and why should it be avoided?
how many milliliters of 0.2M KOH are needed to neutralize 20mL of 0.1M HCl?
calculate the volume of 0.750 mol/L sulfuric acid needed to neutralize completely 20 g if sodium hydroxide
How would you calculate the volume with the given information
Calculate the change in pH when 41.0 mL of a 0.540 M solution of NaOH is added to 1.00 L of a solution that is 1.00 M in sodium acetate and 1.00 M in acetic
so I calculate the pH before adding NaOH which is 4.75 but I can't figure out the next step
What is the molarity of NaOCl in a solution of bleach if 10.00mL requires 22.35mL of 0.02191M Na2S2O3 to reach the endpoint? Show work. Hint: Work through the I2 first. Reaction Equations that... more
Can the vitamin c concentration in fresh orange juice increase after being boiled?
So I'm doing an experiment in Chemistry class for my assignment. The experiment is to boil orange juice at 2 minutes, 4 minutes and 8 minutes and investigate the vitamin concentration by titrating... more
Their goal was to neutralize 0.50 mol NaOH. How many moles of H2SO4 are needed to complete the neutralization?
I do not understand how to solve this question and my EOC is thursday... this is due tonight!!! please help quickly
Ksp and the Common Ion Effect
I just completed a lab in which I titrated Calcium Iodate with Na2S2O3. During the titration we were told to add a starch once the liquid had turned light yellow. When we did this it became dark... more
Titration Acid Base reactions
Calculate pKa and Ka
In a lab we collected the equivalence point pH and the pH of the half-titrated solution and are asked to calculate the pKa and Ka.
If 5 g of sodium bicarbonate is combined with water to make a 100 ml solution, how do I find out how many grams in the final solution?
In chem lab we did a quality control test to determine if the label for sodium bicarbonate (baking soda) is accurate. The label says there is 1,258.56 mg of sodium in a 5 g serving. We made a... more
How would I perform a titration for quality control analysis on sodium levels in a soda and vit. C levels in coconut water?
In chemistry lab we are supposed to perform quality control analysis on a basic product and an acidic product. I chose Sprite and coconut water, but I'm trying to figure out how to do the... more