The Best Mechanical Engineering Tutors in Rockville, MD

Near Rockville, MD

Mechanical Engineer | CAD, Robotics, and Product Design

I have hands-on experience in mechanical engineering, focusing on CAD modeling, product design, and robotics. I specialize in turning mechanical drawings into 3D models using Onshape, SolidWorks, and other design software. I help students understand design principles, constraints, and real-world applications while... See Ivan's full profile

Near Rockville, MD

PhD: Appl'd Math w/ Engineer'g/Mechanics focus Many Eng'ring students

My thesis focused on a problem in Aeronautical Engineering: specifically, flow over and design of wing design for supersonic aircraft, I have tutored many students in many branches of Engineering, Including Mechanical Engineering. I tutored one specific student for several months to prepare her for her... See Mark's full profile

Near Rockville, MD

Aerospace Engineer with 7+ years of experience

I have taken and been course assistant for several aerospace/mechanical engineering courses. I graduated summa cum laude in Aerospace Engineering with above a 3.9 in both my undergraduate and master's degree. Potential courses I can tutor include (but are not limited to): Thermodynamics, Dynamics,... See Ryan's full profile

Near Rockville, MD

Expert Career Consultant

I have graduated from Penn State Mechanical and Nuclear Engineering Department. Many of the courses are given jointly. I feel confident to tutor most of the Mechanical Engineering courses. See Dagistan's full profile

Former ME Professor with 12+ Years Teaching Experience

I hold a PhD in Aerospace Engineering with heavy focus on mechanical systems and served as a mechanical engineering professor for 3 years at the college level. I have 12 years of teaching experience including 4 years as an undergraduate... See Katie's full profile

Harvard Chem+Phys Tutor, Unique Approaches to Teach Engineering Topics

I graduated Harvard University with an A.B. in Chemistry and Physics, with particular focus in Statistical Mechanics, Quantum Mechanics, Organic and Inorganic Chemistry. This grounding in both the pure and applied aspects of Chemistry and Physics... See Jade's full profile

Mechanical Engineering PhD with 9 years of tutoring experience

My core training is in Mechanical Engineering, where I hold a BS, MS and PhD all from the University of Rochester. My graduate work was focused on fluid mechanics, magnet hydrodynamics, and fluid instabilities. See Ibrahim's full profile

Studied Mechanical Engineering at Berkeley, 4 years as professional

I studied mechanical engineering at UC Berkeley, where I also completed a minor in electrical engineering and computer science (EECS) and led a campus robotics club for three years. The focus of my upper division courses was robotics and... See Joshua's full profile

Bachelor of Mechanical Engineering with Honors

I worked as an Undergraduate TA and school Tutor for Math and Physics subjects. I graduated with a 3.9 GPA, taking math-focused engineering classes, including 2 classes at the graduate level. I have been an contract tutor with Varsity Tutors, for... See Paul's full profile

Structural Engineering Masters Student with Aerospace Applications

As a Civil Engineering graduate currently pursuing a Master's degree in Structural Engineering with Aerospace Applications, I have built a strong foundation in core mechanical engineering principles. My undergraduate coursework covered... See KrisAnna's full profile

Theoretical physicist tutor for mechanical engineers

..., as well as mathematical methods of mechanical engineering, e.g. partial differential equations, Fourier analysis, dynamical systems analysis. I professionally consult for aerospace and mechanical engineers' intellectual property development with... See Theodore's full profile

Nuclear Engineer & Submarine Officer | BS & MS Mechanical Engineering

I hold both a B.S. and an M.S. in Mechanical Engineering and currently serve as an active duty Nuclear Submarine Officer. My professional background involves the daily application of advanced principles in Statics, Dynamics, and Fluid... See Benjamin's full profile

Extensive experience tutoring future Engineers

I have a BS and MS in Aeronautical Engineering and an MS in Mechanical Engineering (PhD ABD). While working on my graduate degrees, I taught and tutored at the college level. Courses taught include Statics and Thermodynamics. In the past... See George's full profile

35 years experience analyzing mechanical systems on spacecraft

You can analyze stress and strain in classrooms, but putting knowledge to work is the key. Testing the mechanical systems on spacecraft, the structures, bolts, booms, and robotic arms really puts your learning to practical use. I have done... See Jeff's full profile

Mechanical Engineering Student at the University of Nevada Reno

I am CSWA certified meaning I fully comprehend fundamental SolidWorks modeling, assembly, and drawing skills. In addition, I have over 200 hours of designing experience in SolidWorks through Nevada Electric Racing, a club where students design and... See Andrew's full profile

Bachelor's Degree in Mechanical Engineering with 4+ years tutoring

I have a Bachelor's degree in Mechanical Engineering and over four years of experience tutoring core engineering subjects, including statics, thermodynamics, fluid mechanics, and mechanical systems. I work with students, guiding them... See David's full profile

Ph.D. | M.Sc. Mechanical Engineering | 6+ Years Teaching Experience

I hold a Ph.D. and an M.Sc. in Mechanical Engineering from Texas A&M University. My master's thesis focused on mechanical vibrations, and I was invited by my advisor to continue into the Ph.D. program. My doctoral research bridges... See ANGEL's full profile

Current AE & EE Graduate Student w/ 15 Years of Experience & Knowledge

I'm currently pursuing two graduate degrees in aeronautical and electrical engineering. My areas of expertise in aeronautical engineering are statics, dynamics, fluid mechanics, thermodynamics, and heat transfer. My teaching methods involves... See Andrew's full profile

PhD in Mechanical engineering with 10+ Years of Teaching Experience

My focus during my master and PhD was on Fluid dynamics and biofluids. I have also experience in heat transfer and specifically conduction. I have been teaching Computational Fluid Dynamics (CFD) and related software such as ANSYS-Fluent,... See Alireza's full profile

Mechanical Engineer | Former Defense Industry Engineer

I hold a degree in Mechanical Engineering and previously worked in the defense industry as an engineer, where I worked on armaments and artillery projects. My experience includes developing and refining complex systems, interpreting... See Charles's full profile

Engineering Dynamics Specialist

I hold a Bachelor of Science in Mechanical Engineering and have over three years of experience tutoring core mechanical engineering courses, including Statics, Dynamics, and Mechanics of Materials. I specialize in breaking down... See Eric's full profile

Mechanical Engineering Professor with 41 years of experience

I have been teaching Mechanical Engineering at the college level for 41 years. The subjects that I have taught most often are Thermodynamics, Statics and Dynamics. My students always praise me for showing them the easiest way to solve... See Keith's full profile

Purdue Mechanical Engineering Graduate & FE-Certified Engineer

I earned a Bachelor of Science in Mechanical Engineering from Purdue University and have passed the Fundamentals of Engineering (FE) exam. My coursework included thermodynamics, heat transfer, fluid mechanics, statics, dynamics,... See JJ's full profile

Mechanical Engineer who enjoys tutoring Math and Engineering

I have graduated after 5 years with a Mechanical Engineering major. Some subjects are easier for me than others so be sure to specify. I have taken all thermodynamic classes some material classes and plenty of Statics/ Dynamics/... See Michael's full profile

Mechanical Engineer specializing in Thermodynamics

I graduated from the University of Texas with a M.E. degree where I worked as a TA for senior level Heat Transfer. Thermodynamics is a major component of the FE exam and required for professional licensure, which I also passed in my first... See Blake's full profile