The Best Mechanical Engineering Tutors in Vancouver, WA

Near Vancouver, WA

Mechanical Engineer specializing in Thermodynamics

I graduated from the University of Texas with a M.E. degree where I worked as a TA for senior level Heat Transfer. Thermodynamics is a major component of the FE exam and required for professional licensure, which I also passed in my first attempt. Professionally I have designed heat management solutions utilizing the... See Blake's full profile

Near Vancouver, WA

PhD Student in Mechanical Engineering with 8+ Years of Experience

I earned my BSME with High Honors from the University of Texas at Austin in 2019. I am currently pursuing my PhD in mechanical engineering. I specialize in thermal fluid systems, dynamic systems and control, and statistical analysis. See Noah's full profile

PhD in Electrical Engineering with focus on System and Controls

After graduated, I worked for three fortune 500 companies in their research and advanced engineering department that applies control theory to mechanical systems including engine, vehicle and other heavy machines. I have extensive... See Jing's full profile

Structural Engineering Masters Student with Aerospace Applications

As a Civil Engineering graduate currently pursuing a Master's degree in Structural Engineering with Aerospace Applications, I have built a strong foundation in core mechanical engineering principles. My undergraduate coursework covered... See KrisAnna's full profile

Mechanical Engineering Professor with 41 years of experience

I have been teaching Mechanical Engineering at the college level for 41 years. The subjects that I have taught most often are Thermodynamics, Statics and Dynamics. My students always praise me for showing them the easiest way to solve... See Keith's full profile

Professional Mechanical Engineer in Florida

Licensed Mechanical Engineer in Florida. Experience designing HVAC, plumbing, and piping systems for a vast array of facilities while utilizing building codes to provide signed contract documents. Experience utilizing drawing tools such as... See Christian's full profile

Mechanical Engineering PhD with 9 years of tutoring experience

My core training is in Mechanical Engineering, where I hold a BS, MS and PhD all from the University of Rochester. My graduate work was focused on fluid mechanics, magnet hydrodynamics, and fluid instabilities. See Ibrahim's full profile

Mechanical Engineer | Former Defense Industry Engineer

I hold a degree in Mechanical Engineering and previously worked in the defense industry as an engineer, where I worked on armaments and artillery projects. My experience includes developing and refining complex systems, interpreting... See Charles's full profile

M.S., B.S, NucEng UC Berkeley, 5+ yrs Power Plant & Mech. Engineer

I have a B.S. degree in Nuclear Engineering, UC Berkeley. Mechanical and Nuclear Engineering of Nuclear Power Plants was the major subject of my studies. I also have 5+ years work experience as a United State Navy Submarine Officer... See Dick's full profile

Mechanical Engineering Student at the University of Nevada Reno

I am CSWA certified meaning I fully comprehend fundamental SolidWorks modeling, assembly, and drawing skills. In addition, I have over 200 hours of designing experience in SolidWorks through Nevada Electric Racing, a club where students design and... See Andrew's full profile

Engineering Dynamics Specialist

I hold a Bachelor of Science in Mechanical Engineering and have over three years of experience tutoring core mechanical engineering courses, including Statics, Dynamics, and Mechanics of Materials. I specialize in breaking down... See Eric's full profile

Former ME Professor with 12+ Years Teaching Experience

I hold a PhD in Aerospace Engineering with heavy focus on mechanical systems and served as a mechanical engineering professor for 3 years at the college level. I have 12 years of teaching experience including 4 years as an undergraduate... See Katie's full profile

PhD in Mechanical engineering with 10+ Years of Teaching Experience

My focus during my master and PhD was on Fluid dynamics and biofluids. I have also experience in heat transfer and specifically conduction. I have been teaching Computational Fluid Dynamics (CFD) and related software such as ANSYS-Fluent,... See Alireza's full profile

Mechanical Engineer who enjoys tutoring Math and Engineering

I have graduated after 5 years with a Mechanical Engineering major. Some subjects are easier for me than others so be sure to specify. I have taken all thermodynamic classes some material classes and plenty of Statics/ Dynamics/... See Michael's full profile

Columbia Engineering PhD Specializing in Biomechanics

I earned my PhD and MS in Biomedical Engineering from Columbia University and a BS in Bioengineering with a minor in Mechanical Engineering from Lehigh University. My doctoral research focused on the mechanical behavior of soft biological... See Daniella's full profile

Bachelor of Science in Aeronautical & Astronautical Engineering

I graduated Purdue University's Honors College with a BSAAE in 2025, completing three industry internships prior to graduation (L3Harris Technologies, Sandia National Laboratories, Leidos Dynetics) and accepted a job offer from Lockheed Martin. I... See Radman's full profile

Aerospace Engineer with 7+ years of experience

I have taken and been course assistant for several aerospace/mechanical engineering courses. I graduated summa cum laude in Aerospace Engineering with above a 3.9 in both my undergraduate and master's degree. Potential courses I... See Ryan's full profile

Extensive experience tutoring future Engineers

I have a BS and MS in Aeronautical Engineering and an MS in Mechanical Engineering (PhD ABD). While working on my graduate degrees, I taught and tutored at the college level. Courses taught include Statics and Thermodynamics. In the past... See George's full profile

35 years experience analyzing mechanical systems on spacecraft

You can analyze stress and strain in classrooms, but putting knowledge to work is the key. Testing the mechanical systems on spacecraft, the structures, bolts, booms, and robotic arms really puts your learning to practical use. I have done... See Jeff's full profile

BS in Mechanical Engineering Technology

I was in the top of my class for nearly every STEM class in college. By a couple weeks after being first introduced to a new analytic or modeling software, I was the class expert to ask - typically had collaboration in half of the projects turned... See Bryson's full profile

Engineering & Optimization Tutor — Linear Programming, Thermo, Fluids

I graduated from Stanford University in 1998 with a BS in Mechanical Engineering. During my coursework I often informally tutored classmates in thermodynamics, rigid body dynamics, fluid dynamics, and compressible and incompressible flow. I... See Alan's full profile

Bachelor's Degree in Mechanical Engineering with 4+ years tutoring

I have a Bachelor's degree in Mechanical Engineering and over four years of experience tutoring core engineering subjects, including statics, thermodynamics, fluid mechanics, and mechanical systems. I work with students, guiding them... See David's full profile

Ph.D. | M.Sc. Mechanical Engineering | 6+ Years Teaching Experience

I hold a Ph.D. and an M.Sc. in Mechanical Engineering from Texas A&M University. My master's thesis focused on mechanical vibrations, and I was invited by my advisor to continue into the Ph.D. program. My doctoral research bridges... See ANGEL's full profile

Mechanical Engineer | CAD, Robotics, and Product Design

I have hands-on experience in mechanical engineering, focusing on CAD modeling, product design, and robotics. I specialize in turning mechanical drawings into 3D models using Onshape, SolidWorks, and other design software. I help students... See Ivan's full profile

Aerospace Software Engineer with Mechanical Engineering Master's

I hold a Master's degree in Mechanical and Aerospace Engineering and have five years of industry experience writing engineering software. My professional role centers heavily on structural analysis, fluid dynamics, and... See Mikel's full profile