The Best Mechanical Engineering Tutors in Seattle, WA

Seattle, WA

Lead Structural Engineer with 25 years Experience

I supported Airplanes Service Repair Manuals including Structural and Mechanical systems. As part of my work, I have to solve mechanical statics, dynamics, heat transfer, hydraulic and fluid mechanics problems. I tutored several mechanical engineering subjects such as Statics, Dynamics, fluid mechanics (or fluid... See Yasser's full profile

Seattle, WA

PhD in Mechanical engineering with 10+ Years of Teaching Experience

My focus during my master and PhD was on Fluid dynamics and biofluids. I have also experience in heat transfer and specifically conduction. I have been teaching Computational Fluid Dynamics (CFD) and related software such as ANSYS-Fluent, OpenFOAM and Comsol for the last 6 years. Moreover, I have been teaching Fluid... See Alireza's full profile

Near Seattle, WA

B.S. in Mechanical Engineering with 12 Years Practical Experience

In 2012 I passed the Fundamentals of Engineers (Mechanical) examination. My expertise is in designing temporary fluid systems for testing critical engineering architecture. From 2013 to 2023, I oversaw the design, fabrication, use, and disposal of radioactive test equipment in the Naval Nuclear Propulsion Program. From... See Dustin's full profile

5+ Years of teaching intro to advanced Mechanical Engineering courses

I have taught Engineering Mechanics: Statics, Engineering Mechanics: Dynamics, which are the two key intro courses that 99% of engineering students begin with. Moving into more advanced courses, I have taught two years of Deformable... See Mandy's full profile

Mechanical Engineer who enjoys tutoring Math and Engineering

I have graduated after 5 years with a Mechanical Engineering major. Some subjects are easier for me than others so be sure to specify. I have taken all thermodynamic classes some material classes and plenty of Statics/ Dynamics/... See Michael's full profile

Engineering PhD with 30 years teaching/research experience

Taught mechanical engineering courses in two universities for 12 years. Doing one to one tutoring in math, physics, and engineering for 6 years. See Yuan's full profile

Master of Science in Mechanical Engineering

I received my Master of Science in Mechanical Engineering from Boston University in 2020. I concentrated in Biomaterials/Biomechanics. As part of this degree, I took classes such as Statics, Fluid Mechanics, Thermodynamics, etc. See Melissa's full profile

Senior Aerospace Engineering student with 3 years tutoring experience

I am a senior Aerospace engineering student at the University of Tennessee. I have experience tutoring fellow students in statics, thermodynamics, fluid mechanics, heat transfer, and system dynamics. See Alexander's full profile

Mechanical Engineering Professor with 41 years of experience

I have been teaching Mechanical Engineering at the college level for 41 years. The subjects that I have taught most often are Thermodynamics, Statics and Dynamics. My students always praise me for showing them the easiest way to solve... See Keith's full profile

Engineering Grad, Tutor for all Math and Science

I graduated with a Degree in Mechanical Engineering, and have tutored in many of the classes ever since. My background as a Math teacher enables me to help my students learn efficiently and effectively. See Mike's full profile

Grad Mechanical Engineer | Expert Tutor for Core ME Courses & FE Exam

I earned both my BS (High Honors) and MS in Mechanical Engineering from the Georgia Institute of Technology and have more than 15 years of experience tutoring college engineering students. As a former Teaching Assistant for Thermodynamics... See Zeeshan's full profile

Professional Mechanical Engineer with 10+ Years Experience, BSME

I have attained a Bachelor's of Science in Mechanical Engineering from SUNY Binghamton (an accredited engineering program in New York) with a GPA of 3.3. I have served as a professional mechanical engineer for more than 10+... See Keith's full profile

Princeton Engineering PhD Tutoring Statics

I have an PhD in civil engineering from Princeton University. Statics is a fundamental part of both civil and mechanical engineering and important to understand before moving on to more challenging classes. I am experienced in teaching... See Christine's full profile

Engineer with experience in thermal subjects and fluid dynamics

My mechanical engineering expertise from my studies and work is in the subjects of thermodynamics, heat transfer, and fluid dynamics. I can size pumps and motors, and solve 1D, 2D, 3D, and partial differential equations . There are some... See Michael's full profile

Bachelor of Mechanical Engineering with Honors

I worked as an Undergraduate TA and school Tutor for Math and Physics subjects. I graduated with a 3.9 GPA, taking math-focused engineering classes, including 2 classes at the graduate level. I have been an contract tutor with Varsity Tutors, for... See Paul's full profile

Professional Engineering Instructor and Highly Versatile Tutor

Since 2000, my full-time job is as a staff instructor in a small industrial school that provides advanced education to engineers in various mechanical and nuclear engineering courses. Mechanical engineering courses that I am... See Marty's full profile

BS in Mechanical Engineering Technology

I was in the top of my class for nearly every STEM class in college. By a couple weeks after being first introduced to a new analytic or modeling software, I was the class expert to ask - typically had collaboration in half of the projects turned... See Bryson's full profile

Aerospace engineering senior with a mechanical engineering focus

I have been featured on the deans like for five out of my six completed semesters. I have excelled at all academic challenges I have been presented during my time in university. I have a mechanical engineering focus meaning many of my... See Benjamin's full profile

Mechanical Engineer with over 4 years of experience with Solidworks.

I’m a Mechanical engineer with professional Solidworks experience. I use solidworks for design work at my job day to day. I have taken CAD designs to 3D print prototypes, to machine parts, and produced drawings for these parts. See Kevin's full profile

Community College Engineering Tutor

I am currently a 3rd year mechanical engineering student with a 3.90 GPA and an A.S. degree in both math and science. My focus is geared towards helping others strengthen the key fundamentals involving physic's subjects, such as:... See Aaron's full profile

PhD Student in Mechanical Engineering at MIT

I am currently a PhD Student in Mechanical Engineering at MIT and have graduate from Purdue University with highest distinction majoring in Mechanical Engineering and minoring in Computer Science. I advise students on (undergraduate... See Harry's full profile

PhD researcher with 9 years experience tutoring

I am currently a PhD researcher in mechanical engineering at Georgia Tech. I have completed my masters in mechanical engineering at Georgia Tech (2022) and my bachelors in mechanical engineering at Cornell (2020). I am... See Madeline's full profile

Harvard Chem+Phys Tutor, Unique Approaches to Teach Engineering Topics

I graduated Harvard University with an A.B. in Chemistry and Physics, with particular focus in Statistical Mechanics, Quantum Mechanics, Organic and Inorganic Chemistry. This grounding in both the pure and applied aspects of Chemistry and Physics... See Jade's full profile

PhD in Mechanical Engineering with 5+ years of teaching experience

Currently, I am appointed to teach undergraduate Integral Calculus and Mathematical Modeling. I have a PhD in Mechanical Engineering and two bachelors: Mechanical Engineering and Pure Mathematics. See Juan's full profile

Senior Aerospace Engineering Student

Aerospace Engineering is considered one of the hardest, if not the hardest engineering discipline and is just an extension of the mechanical engineering curriculum. As an Aerospace Engineer, I have had to go through both the... See Jan's full profile